Qualitative analysis identifies what is present in a sample. In Cambridge IGCSE Chemistry 0620, you use the reagent and observation together to identify an ion or gas. Cambridge provides the reference notes for both Paper 5 and Paper 6 under the 2026–2028 syllabus. The original reference is on pages 47–48. Cambridge 0620 syllabus and qualitative analysis notes
How do you use the qualitative analysis sheet?
Start with the type of result the question gives you. A precipitate after adding aqueous sodium hydroxide usually sends you to the cation table. If a gas was produced and a second test was carried out, look at both the relevant ion test and the gas table. The result of the first test tells you where to look. The second observation may give the evidence needed to identify the ion.
When the question asks for an observation, write what happened. “A white precipitate forms and dissolves in excess” records two observations. “Zinc ions are present” is an inference. Keep both in their own columns if the paper supplies a table.
Cation tests: colour and excess reagent
These selected contrasts show why the initial colour rarely settles a question by itself. Check the supplied notes for the full set of ions and outcomes.
| Observations supplied in a question | How to interpret them |
|---|---|
| White precipitates dissolve in excess of both aqueous sodium hydroxide and aqueous ammonia | The combination supports zinc ions |
| White precipitates with both reagents, dissolving in excess sodium hydroxide only | The combination supports aluminium ions |
| Light blue precipitate with aqueous ammonia, then a dark blue solution in excess | The change supports copper(II) ions |
| Green precipitate that stays undissolved in excess sodium hydroxide and browns at the surface on standing | The change supports iron(II) ions |
| Red-brown precipitate that remains in excess sodium hydroxide | This supports iron(III) ions |
Read “excess” as part of the observation. A solid that disappears into a colourless solution is a different result from a solid that settles in a colourless liquid. A phrase such as “white to colourless” leaves that distinction unclear. In a written answer, specify whether a precipitate formed and whether it dissolved.
Anion tests: link the reagent to the result
After acidifying a sample with dilute nitric acid, Cambridge's reference gives white, cream and yellow silver nitrate precipitates for chloride, bromide and iodide respectively. A white precipitate with the acidified barium nitrate test instead supports sulfate. A colour by itself does not identify the ion.
When an unknown contains carbonate, the acid test produces gas. Effervescence tells you a gas formed. Limewater turning milky is the follow-up observation that identifies carbon dioxide. Distinguish those two observations when the question asks what you would see at each stage.
Why use fresh portions when comparing tests? A reagent in the first test may already have added an ion. For example, a chloride-containing acid can introduce chloride before a silver nitrate test. Using separate portions lets each test start with the original solution.
Build a practice paper in PrickyAI
Choose questions for a practice session and work through the paper in the app.
Gas tests: specify the observation
| Observation from the stated test | Gas supported |
|---|---|
| Damp red litmus turns blue | Ammonia |
| Limewater turns milky | Carbon dioxide |
| A lighted splint gives a pop | Hydrogen |
| A glowing splint relights | Oxygen |
“Test with a splint” leaves out the distinction between the lit and glowing splints. If the prompt asks for the test and the result, give both. Treat this as written exam practice and follow your teacher's laboratory instructions for practical work.
Worked Paper 6 example: identify an unknown salt
Question. An unknown solution gives a white precipitate with aqueous sodium hydroxide. The precipitate dissolves in excess. A fresh portion gives a white precipitate with aqueous ammonia, and that precipitate also dissolves in excess. A separate acidified portion gives a cream precipitate with aqueous silver nitrate. Identify the cation and anion and state the evidence for each.
Answer. The cation is zinc, because the white precipitate dissolves in excess of both reagents. The sodium hydroxide result alone would leave aluminium as another possibility. The anion is bromide, because the acidified silver nitrate test gives a cream precipitate. Keep “cream precipitate” in the evidence line and “bromide” in the inference line.
Now alter the example. If the precipitate stays undissolved in excess ammonia, while still dissolving in excess sodium hydroxide, the cation evidence changes to aluminium. If the silver nitrate precipitate is yellow, the anion evidence changes to iodide. Practise changing one observation at a time to see which inference it affects.
Why detecting ammonia may be only the first step
Ammonia turning damp red litmus blue tells you which gas was produced. To identify the original ion, check what was added to the sample. Cambridge's cation table associates ammonia released after warming with aqueous sodium hydroxide with ammonium ions. The anion table associates ammonia with the nitrate test when the stated method also includes aluminium foil. If you skip the reagent line and jump straight from the gas to an ion, these two questions can look identical.
Try writing the evidence as three short lines in a practice answer. Give the stated reagent or conditions first, then the observed litmus change, then the inference the question actually requests. Read the final instruction closely. “Name the gas” asks for ammonia. “Identify the ion present in the original solution” asks for the ion that fits the stated test and its result.
How to revise qualitative analysis for 0620
Do one round with the reference sheet open. For each prompt, underline the reagent, then find its column before you scan for a colour. In a second round, cover the ion names and explain how you would distinguish the two most similar results. In a final round, write complete observations under time pressure. Use the official Cambridge Chemistry past papers for practice and match each paper to its own mark scheme.
For theory calculations, use the Cambridge science method marks guide. For experimental planning and interpreting graphs, see the Physics Alternative to Practical guide.
Do you need to memorise the tests for Chemistry Paper 4?
The supplied qualitative analysis notes are for the Practical Test and Alternative to Practical. Cambridge still expects candidates to be able to describe the tests listed in section 12.5 of the syllabus. Practise with the reference open for practical-paper interpretation, then close it and recall the reagent and expected observation for a theory-style question. Cambridge guidance on supplied qualitative analysis notes
A reference sheet tells you what should happen under the conditions shown. The question may instead give you a result from an investigation and ask what it supports. In that case, read the observation in the question first. For example, if a test produces a green precipitate, check the reagent and what happens in excess before choosing between iron(II) and chromium(III).
Three short questions to practise interpreting test results
These original prompts use supplied observations. Work through them as written questions and compare your reasoning with the qualitative analysis notes.
1. Distinguish two green precipitates
Question. A solution gives a green precipitate with aqueous sodium hydroxide. The solid dissolves when excess of the same reagent is added. Which of iron(II) and chromium(III) fits this observation?
Answer. Chromium(III). Cambridge lists a green precipitate for both ions with sodium hydroxide. The chromium(III) precipitate dissolves in excess, while the iron(II) precipitate remains. If the question only gives the initial colour, ask which additional observation would distinguish the two.
2. Combine a flame result and an anion test
Question. A sample gives a lilac flame. A separate portion gives a white precipitate in the acidified barium nitrate test. Which ions do the results support?
Answer. The lilac flame supports potassium ions. The white precipitate with acidified barium nitrate supports sulfate ions. State both pieces of evidence. A white precipitate also appears in other tests, so name the reagent before interpreting its colour. Check the reference for the full flame-colour list, including sodium's yellow and copper(II)'s blue-green. Cambridge 0620 notes for gas and flame tests
3. Explain why a gas test has two observations
Question. A solid fizzes when dilute acid is added. The gas then turns limewater milky. Which observation shows a gas was released, which identifies the gas, and what does this support about the solid?
Answer. Fizzing shows that gas was released. The limewater result identifies the gas as carbon dioxide. Together the observations support the presence of carbonate under the conditions in the question. Use the words “effervescence” and “limewater turns milky” for the observations, then state the conclusion separately.
Build a qualitative analysis practice set in PrickyAI
Choose Chemistry in PrickyAI and look for questions on experimental techniques and identifying ions and gases. Practise in pairs. First answer a practical-style question with the Cambridge sheet open. Then write the complete test for one ion from memory. When checking the answer, label each mistake as a reagent, observation or inference error.
In the next session, mix several tests so an expected colour does not give the whole answer away. Compare your answer with the exact instructions in the question and its matching scheme. If you confuse two tests, write a short contrast such as “silver nitrate with a cream precipitate supports bromide, while barium nitrate with a white precipitate supports sulfate.” Then test each one in a different scenario.



